Stop Using Old Heat Lamps in Your Bathrooms and Gazebos
Let’s be honest: those old-school heat lamps are kind of a headache. If you’ve ever had one in a steamy bathroom or an outdoor gazebo, you know the drill. A little bit of rain or a few showers, and suddenly the unit burns out because moisture leaked into the housing. It’s frustrating. That’s why we’ve started moving everyone over to 1500W infrared ceiling heaters with high waterproof (IP) ratings. They just hold up better. Why 1500W? Here is the thing about heat. If you’re standing in an open gazebo or a big bathroom, the warm air just vanishes into the sky or drifts away. You can’t waste time trying to warm up the entire room. These infrared heaters work differently. Instead of heating the air, they send warmth directly to your skin and whatever you’re touching. It’s an instant feeling of warmth. With 1500W, you get enough punch to feel that heat hit the floor before it disappears into the atmosphere. It’s fast. Really fast. Keeping the Water Out Most basic heaters have open vents. In a shower or a rainy backyard, that’s basically an invitation for a short circuit. We use sealed housings and special coatings to keep the dampness out. The heating element itself is tucked inside quartz glass, so it doesn’t crack when the temperature jumps. One quick tip: make sure your wiring is up to the task. A 1500W load is significant. If your cables are too thin, they’ll get way too hot when the heater is running for a while. Not a good look. Fitting Them In The best part? These usually drop right into the same spot where your old lamps were. They fit the same footprint but are way safer. But a word of caution. Even with the waterproof internals, the outside of the unit gets hot. You don’t want anyone accidentally brushing against it. Plus, if you mount them too low, you might actually damage your ceiling materials. Stick to a height of at least 2.2 meters. You’ll get a much better spread of heat, and everyone stays safe.